 |
 |
|
Product and Photo Gallery SELF BAILING WHITEWATER RAFTS Fat Boy Self Bailing White Water Raft The Fat Boy Self Bailing white water raft encorporates some of the great design features of our Dragonfly raft series in a small 5 person raft design. The bottom of the raft has the same tunnel shape as the Dragon Fly, and the same removable drop stitch floor panel. These features give the boat great tracking, acceleration, hull speed, and flotation. In addition we have added the foot thwart concept that works so well on our Culebra Grande, and our Outfitter culebra models . There is no need to glue any foot cups in because the foot thwarts work so much better, and hold paddlers in so much better. Of particular interest are the end foot thwarts that help keep the captain in the boat.
SW Drawing 19 inch dia self bailing whitewater raft This is a drawing of a self bailing whitewater raft that is13.5 ft long raft, 81 inches wide, and 19 in dia tubes. The over all bow rise is 12 inches. SW Sectional view of 19 inch diameter self bailing whitewater raft This is a sectional view of the 19 inch diameter self bailing whitewater raft. Note that the self bailing dropstitch floor is actually slightly wider than the main tubes. This keeps the floor tight, and keeps the boat from filling with too much water in a reversal. The floor is raised 2 inches higher than the main tubes. This design gives good tracking effect from the main tubes, and creates the best hull speed in the industry. Remember that we use PVC coated Polyester fabric for a ridged tube set up. We use quality inflatable fabric, and never use bladders and zippers. All air holding seams and attachment points are welded into place. This boat includes a 10 year warranty. SW Drawing of 22 inch dia self bailing whitewater raft This is a drawing of a self bailing whitewater raft that is 15 ft long raft, 84 inches wide, and 22 inch dia tubes. The over all bow rise is 12 inches. SB raft 16 ft 8 in long, 80 inches wide, 22 inch dia Use this picture to get a comparison of different sizes that are available. SB raft 13 ft 7 in long, 80 inches wide, 22 inch dia tubes Use this picture to get a comparison of different sizes that are available. 13 ft 7 inch self bailer on the Yampa river Use this picture to get a comparison of different sizes that are available. Custom self bailing white water raft designed by the customer Dave B emailed us last winter about having us build a raft design that he had never seen before. He was very specific. He knew what he wanted, and this is what he asked for: A 15.5 ft long boat with a 78 inch wide beam. This boat would have an 8 inch kick in the front and come to a narrow front section of approximately 18 inches. In the back he wanted a 6 inch kick, a double layer of material for mounting a transom, and it had to be much wider in the rear for the motor, approximately 34 inches. We usually put 4 chambers in a boat. Dave wanted 6. On a boat this size we usually suggest 22 inch tubes; he wanted a smaller tube for less wind resistance, and a large drop stitch floor. On top of all that, we built mesh panels that fit existing frames he used to carry animals killed on hunting trips. He also asked us about how we may build a wind screen on the front for foul weather. The purple pocket in the model holds the flexible pole that makes up the back of the screen. He asked us to remove all 2 inch d rings and replace them with many more 1 inch d rings. We soon realized he was building his concept of the ultimate hunting raft. This computer model is what we came up with. Dave really knew what he wanted, and there are a few folks that do. If you are one of them, we can build a custom raft for you also. Have a look at the finished product on a trip in Alaska. 15 ft self bailing whitewater raft built for cargo and speed Our new 15 ft self bailing raft has 22 inch diameter tubes, is 84 inches wide, and 15 ft long with a 12 inch kick on the front and the back. The self bailing floor is wedged in tightly under the main tubes. This gives a very smooth surface on the bottom. Yet with the main tubes 2 ½ inches lower than the floor, the boat tracks exceptionally well without drafting very much. Maximum flotation, minimum drag, and capacity for passengers, or gear, is how we see our self bailing raft designs. We use the highest quality PVC coated polyester fabrics. We weld on 2 inch stainless steel d ring patches. We pride ourselves on having the best customer service in the industry, and a 10 year warranty to boot. Have a look at the solid works design |
|
|
Phone (505) 334 8748 - Fax (505) 334 1901 - info@jpwinc.com |
|
